2019 Mercedes GLE 400 d 4MATIC Technical data:
Number of cylinders/arrangement: 6/in-line, 4 valves per cylinder
Displacement cc: 2925
Bore x stroke mm: 82.0 x 92.3
Rated output kW/hp: 243/330 at 3600-4000 rpm
Rated torque Nm: 700 at 1200-3000 rpm
Compression ratio: 15.5: 1
Mixture formation: Common-rail high-pressure injection
Drive system: Permanent all-wheel drive
Transmission: 9G-TRONIC 9-speed automatic
Acceleration 0-100 km/h s: 5.8
Top speed km/h: 240
Front axle: Double wishbone, coil springs, single-tube gas-filled shock absorber, stabiliser bar
Rear axle: Multi-link suspension, coil springs, twin-tube gas-filled shock absorbers, stabiliser bar
Braking system: Internally ventilated disc brakes all-round, electric parking brake, ABS, Brake Assist, ESP®
Steering: Electrically supported rack-and-pinion power steering system
Wheels: 8.0 J x 19 H2
Tyres: 255/50 R 19 W
The new Mercedes-Benz GLE will be presented to the public for the first time at the Mondial de l’Automobile in Paris (4 to 14 October 2018). It will be in the dealerships in early 2019 (USA and Europe), and in spring 2019 in China. The GLE is produced in Tuscaloosa (Alabama/USA).
The five most important innovations in the new GLE:
– E-ACTIVE BODY CONTROL: Fully networked hydropneumatic, active suspension on a 48-volt basis, for the first time in combination with the likewise newly developed air suspension. This is the only system in the market where the spring and damping forces can be individually controlled at each wheel. This means that it not only counteracts body roll, but also pitching and squat.
– Active Tailback Assist: This driving assistance system enables the GLE to recognise tailbacks at an early stage, actively support the driver in stop-and-go traffic up to approx. 60 km/h and even help to form a rescue lane
– Turn-off function of Active Brake Assist: If there is a danger of a collision with oncoming traffic when turning off across a carriageway, the GLE can be braked at the speeds typical of such manoeuvres.
– 4MATIC: Available for the first time for models with six and eight-cylinder engines and the plug-in hybrid, fully variable all-wheel drive (Torque on Demand, TonD) controls the torque distribution between the front and rear axle from 0‑1 00 % depending on the selected driving mode. With the optional Offroad package, and as a world first, likewise fully variable all-wheel drive (TonD) with a low and high range is available. This makes the GLE more off-road capable than ever.
– Seating comfort: The new GLE has a much longer wheelbase (plus 80 mm), with corresponding interior spaciousness. Comfort is particularly enhanced by the optional, fully electrically adjustable second seat row – a third seat row is also available as an option.
The new Mercedes-Benz GLE will be launched with the new in-line six-cylinder petrol engine, and other engines including diesels and a plug-in hybrid will follow.
ISG eliminates the need for a belt drive for ancillary components at the front of the engine, which reduces its overall length. The slim design, together with the physical separation of intake/exhaust, creates space for near-engine exhaust aftertreatment. The 48-volt on-board power supply serves not only high power consumers such as the water pump and air-conditioning compressor, but also the Integrated Starter Generator (ISG), which also supplies energy to the battery by means of highly efficient energy recuperation.
In all variants of the new GLE, power is transmitted by the 9G-TRONIC automatic transmission. The broad ratio spread of gears one to nine allows a clearly perceptible reduction in engine speed and is a decisive factor behind the high level of energy efficiency and ride comfort. With the four cylinder engines, 4MATIC all-wheel drive is realised with a transfer case which transmits the drive torque to the axles in a fixed ratio of 50:50 percent. Spinning wheels are braked by braking intervention at the relevant wheel.
Also when driving on the road, and particularly when cornering, the two fully networked transfer cases with torque on demand allow a further improvement in handling safety and agility by specifically influencing the degree of yaw to induce oversteer or understeer.
The new GLE is the debut of the latest generation of Mercedes-Benz driving assistance systems giving cooperative support to the driver. The level of active safety has not only been improved further compared to the preceding model, as some Intelligent Drive functions are also unrivalled beyond the SUV segment.