Home Vídeos 2021 Ford Bronco Two And Four Door – Wild SUVs Ready For...

2021 Ford Bronco Two And Four Door – Wild SUVs Ready For Fun

773
0

2021 Ford Bronco Two And Four Door – Wild SUVs Ready For Fun. 2021 Ford Bronco Two And Four Door – Drive, Interior and Exterior. Please Consider Subscribing.

0:00 Interior and Exterior
1:53 Facts and Figures
5:35 Off-Road Drive

Just like the first-generation Bronco, nicknamed G.O.A.T., the mission of the all-new 2021 Bronco is to deliver maximum 4×4 go-anywhere, anytime capability and confidence. Bronco incorporates off-road mapping and drive technologies to give novice adventurers as much fun as hard-core off-road experts, while its Built Wild durability makes for lasting performance in the harshest of conditions for generations to come.

Up to seven driver-selectable modes are offered including Normal, Eco, Sport, Slippery and Sand, with Baja, Mud/Ruts and Rock Crawl for off-road driving.

Two 4×4 systems are offered on all Bronco models, a base setup and advanced 4×4. The base system utilizes a two-speed electronic shift-on-the-fly transfer case, while the optional advanced system features a two-speed electromechanical transfer case that adds an auto mode for ondemand engagement to select between 2H and 4H. Power is distributed to a Dana™ 44 AdvanTEK® solid rear axle and Dana AdvanTEK independent front differential unit – both with available Spicer® Performa-TraK™ electronic locking differentials for improved traction over rough terrain.

Available segment-first Trail Toolbox gives Bronco owners a suite of exclusive technologies to elevate their off-road experience. This includes Trail Control™ – cruise control for low-speed trail driving, while Trail Turn Assist tightens off-road turning radiuses through torque vectoring, and the innovative Trail One-Pedal Drive acceleration/braking control makes for more precise and confident slow-mode rock crawling.

Segment-leading levels of off-road capability are possible thanks to Bronco’s available best-inclass 11.6-inch ground clearance, maximum 29-degree breakover angle and 37.2-degree departure angle, plus best-in-class water fording capability of up to 33.5 inches. Off-road capability is further reinforced by exposed tow hooks in the front and rear and available heavyduty modular steel bumpers with integrated Ford Performance accessory winch mount.

Bronco’s strategically placed steel shields protect critical hardware. Higher-capability models get an available front bash plate, plus shields for the engine, transmission, transfer case and fuel tank. For those taking on the roughest rocky terrain, Bronco’s available side rock rails are strong enough to support the weight of each side of the vehicle.

All-new Bronco architecture for two- and four-door models is based on a fully boxed, highstrength steel chassis that delivers available best-in-class suspension travel – 17 percent more both front and rear over the closest competitor to thrive in rugged environments.

To deliver thrilling high-speed off-roading and overall driving performance, every Bronco comes with an independent front suspension for improved control, confidence and comfort. At the rear, a rugged solid axle design featuring coil springs with five locating links delivers both strength and off-road control. Long-travel position-sensitive Bilstein dampers with end-stop control valves at every corner are available for added off-road durability and reduced harshness.

An available segment-exclusive semi-active hydraulic stabilizer bar disconnect design provides maximum articulation and increased ramp angle index for off-camber terrain. This innovative system bests competitors by disconnecting during articulation; it can reconnect under all conditions to improve steering and stability at higher speeds.

Segment-first 35-inch off-road tires direct from the factory are available on every trim level of two- and four-door Bronco, while available segment-first beadlock-capable wheels allow customers to elevate off-road capability, regardless of price point.

Best-in-class projected gasoline-powered horsepower and torque is available with the 2.7-liter EcoBoost V6 engine, which is projected to produce 310 horsepower and 400 lb.-ft. of torque, while the 2.3-liter EcoBoost is targeted to deliver best-in-class four-cylinder torque of 310 lb.-ft. with an expected 270 horsepower.

For maximum low-speed rock-climbing capability, a segment-first 7-speed (6+1) manual transmission paired with the available advanced 4×4 system with automatic on-demand engagement generates a class-leading available crawler-gear ratio of 94.75:1. An available segment-first SelectShift® 10-speed automatic transmission makes for easier driving on- and offroad, while offering a maximum 67.8:1 crawl ratio with the available advanced 4×4 transfer case.

LEAVE A REPLY

Please enter your comment!
Please enter your name here