Home Vídeos 2019 Grey Mercedes AMG A35 – Dynamic, Agile and Powerful

2019 Grey Mercedes AMG A35 – Dynamic, Agile and Powerful


2019 Grey Mercedes AMG A35 – Dynamic, Agile and Powerful. 2019 Mercedes AMG A35 4MATIC – Drive, Interior and Exterior. Color: Designo Mountain Grey Mango. Subscribe.

2019 Mercedes-AMG A 35 4MATIC Technical Data:

Number of cylinders/arrangement: 4/in-line, 4 valves per cylinder
Displacement cc: 1991
Rated output kW/hp: 225 kW (306 hp) at 5800 rpm
Rated torque Nm: 400 Nm at 3000-4000 rpm
Compression ratio: 10.0: 1
Mixture formation: Microprocessor-controlled petrol direct injection, forced induction by twin-scroll turbocharger
Drive system: AMG Performance 4MATIC variable all-wheel drive
Front axle: McPherson axle, braking torque support, coil springs, stabilizer bar
Rear axle: 4-link axle, coil springs, stabilizer bar
Braking system: 4-piston monoblock fixed callipers and 350 mm brake discs at front, ventilated and perforated, 1-piston sliding callipers and 330 mm brake discs at rear, ventilated and perforated, electric parking brake at rear, ABS, Brake Assist, 3-stage ESP®
Steering: Electro-mechanical, speed-sensitive rack-and-pinion sports power steering with variable steering ratio (14.4:1 in centre position) and two characteristics
Wheels front: 8.0 J x 18; rear: 8.0 J x 18
Tyres front: 235/40 R 18; rear: 235/40 R 18
Acceleration 0-100 km/h s: 4.7
Top speed km/h: 250

The 2.0-litre turbo engine in the A 35 4MATIC is an entirely new development and is based on the M 260 four-cylinder engine in the new A-Class. The new drive system boasts a spontaneous response to accelerator pedal commands, high tractive power (400 Nm max. torque from 3000 rpm), a supremely lively response and an emotional engine sound. The crankcase made of high-strength, lightweight die-cast aluminium reduces the vehicle weight where it matters most for driving dynamics.

A twin-scroll turbocharger is used for turbocharging. It combines optimum responsiveness at low engine speeds with a strong power increase at higher speeds. The housing of the twin-scroll turbocharger is divided into two parallel ducts. Together with two separate exhaust ducts in the exhaust manifold, this makes it possible to channel the exhaust gases separately on the turbine wheel.

The cylinders are divided into two cylinder groups and each is directed onto a turbine flow of the twin-scroll turbine. The cylinder groups are defined based on the ignition sequence. This results in a further advantage of twin-scroll technology, i.e. minimisation of the mutually adverse effects of the individual cylinders on the gas cycle. The exhaust gas back pressure is reduced and gas exchange and engine efficiency are improved. The water charge air cooler and the self-contained air intake (clean air line) support optimum power delivery and agility.

The exhaust system features an automatically controlled exhaust flap as standard. Depending on the drive program selected the sound is modulated from balanced to powerful. A silent start is programmed as the basic setting: the A 35 4MATIC always starts in quiet mode.

The AMG SPEEDSHIFT DCT 7G dual-clutch transmission also contributes to the agile and dynamic character of the new A 35 4MATIC. The gear ratios have been configured so that the driver experiences very spontaneous acceleration in all speed ranges, combined with fast shifting and optimum connections when shifting up. The standard RACE-START function allows maximum acceleration from stationary and is a highly emotional experience. The functions of the AMG SPEEDSHIFT DCT 7G transmission are rounded off with a temporary M mode activated by operating the steering wheel shift paddles in any driving mode, and with the manual transmission mode “M” for manual gear shifting with the shift paddles.

Dynamism, agility and performance – these three attributes characterise the standard all-wheel drive of the new AMG A 35 4MATIC. The variable AMG Performance 4MATIC combines the best possible traction with lots of driving fun. The torque distribution is infinitely variable to suit the dynamic handling requirements. The spectrum ranges from front-wheel drive only to a 50:50 percent distribution to the front and rear axles.

A multi-disc clutch that is integrated in the rear axle transmission is responsible for the variable torque distribution between the front and rear axles. It is controlled electro-mechanically. The influencing factors for torque distribution are not only the driving speed, the lateral and longitudinal acceleration and the steering angle, but also the difference in rotational speed between the individual wheels, the gear selected and the accelerator position.


Please enter your comment!
Please enter your name here