2020 Mercedes GLA Edition1 – Stylish Compact SUV. 2020 Mercedes-Benz GLA Edition1 AMG Line – Drive, Interior and Exterior. Color: Mountain Grey MAGNO. Subscribe.
The new GLA, the eighth model to join the line-up, rounds off the current compact car generation from Mercedes-Benz. At the same time it represents the entry level into the brand’s successful family of SUV models. The character has been significantly reinforced here compared with the previous model: the height of the new GLA, at 1611 millimetres (1616 with roof rails), exceeds that of its predecessor by more than ten centimetres. The correspondingly higher and characteristic SUV seating position also comes with more headroom in the first row. Legroom in the rear is likewise much more generous – even though the GLA is now one and a half centimetres shorter. Typical off-road design features include the upright front section, short overhangs at the front and rear, and protective cladding all round. 4MATIC models feature the Off-Road Engineering Package as standard. This comprises an additional driving program, a downhill driving assist function and an off-road animation in the media display, along with, in combination with MULTIBEAM LED headlamps, a special light function for off-road driving.
The new GLA makes a further step in terms of safety courtesy of its driving assistance systems with cooperative driver support. The enhanced functions of the Driving Assistance Package include, for example, the turning manoeuvre function, the emergency corridor function, the exit warning function alerting the driver to approaching cyclists or vehicles, and a warning when pedestrians are detected near zebra crossings. The GLA is able to react when the driver doesn’t. Active Brake Assist is charged in many situations with applying autonomous braking to avoid a collision or to reduce its severity. The system can also brake at a speed of up to approx. 60 km/h for stationary vehicles and pedestrians crossing the road ahead. Depending on the situation this even prevents collisions up to a speed of 50 km/h. The new GLA is set to arrive at European dealerships in the spring of 2020.
The new GLA places its trust in the four-cylinder petrol and diesel engines which were completely modernised for the new edition of the compact model series. In comparison to the previous generation, they are characterised by significantly increased specific outputs and by improved efficiency and emissions. A locally emission-free model with third-generation plug-in hybrid drive system is already being prepared.
The gateway to the petrol-model range is the M 282 with a displacement of 1.33 litres in the GLA 200. This engine has cylinder shut-off for efficient operation in the partial-load range.
Top of the line is the Mercedes-AMG GLA 35 4MATIC. The 2.0-litre four-cylinder turbo engine has an immediate response to accelerator pedal commands, high tractive power (400 Nm max. torque from 3000 rpm), a supremely lively response and an emotive engine note. The crankcase made of high-strength, lightweight die-cast aluminium reduces the vehicle weight where it matters most for driving dynamics. A twin-scroll exhaust gas turbocharger is used for turbocharging. It combines optimum responsiveness at low engine speeds with a strong power increase at higher speeds.
The high technological standards of the new four-cylinder engine are also underscored by numerous efficiency-enhancing measures. These include CAMTRONIC variable valve train, intelligent thermal management for coolant and oil, high-precision piezo injectors and multi-spark ignition. In production, the patented CONICSHAPE® cylinder honing reduces in-engine friction and also increases efficiency.
The front axle of the new GLA features a MacPherson design. Wheel control is taken care of by one transverse control arm below the wheel centre, the MacPherson strut and one tie rod. The wishbone is forged from aluminium. This reduces both weight and unsprung masses. The steering knuckles are made of cast aluminium.
The GLA features a sophisticated 4-link rear axle. The three transverse links and one trailing arm at each rear wheel are configured for maximum driving stability, ride quality and longitudinal/lateral dynamics. The rear axle is mounted on a subframe isolated from the body shell by rubber bushings so that fewer vibrations are transferred from the suspension to the body.