Home Vídeos New BMW M3 Touring G81 FACELIFT 2025 (530HP) | FIRST LOOK &...

New BMW M3 Touring G81 FACELIFT 2025 (530HP) | FIRST LOOK & Sound

2
0

New BMW M3 Touring G81 FACELIFT 2025 (530HP) | FIRST LOOK & Sound. the new BMW M3 Touring G81, Facelift 2025.

All the variants of the new BMW M3 Sedan and new BMW M3 Touring feature a high-revving straight-six engine with M TwinPower Turbo technology. In all its output variants, the 3.0-litre unit stands out with its healthy appetite for revs into the highest reaches of the engine speed range and so produces the linear power delivery typical of high-performance models from BMW M GmbH.

Numerous elements adapted from race-car engine construction allow the power unit in the M3 to deliver an unmistakable performance experience on both road and track. The crankcase, with its sleeve-free, closed-deck construction, is extremely rigid and teams up with a forged crankshaft with lightweight design to unlock extremely high torque potential. The cylinder bores have a wire-arc sprayed iron coating. And the 3D-printed core for the cylinder head – another special M-specific feature – enables optimised routing of the coolant ducts that would be impossible to achieve using conventional metal casting methods.

Like the cooling system, the oil circuit is also designed to handle the particular challenges of track driving. A map-controlled oil pump ensures reliable oil supply even under extreme longitudinal and lateral acceleration.

The M TwinPower Turbo technology here comprises two mono-scroll turbochargers, each of which supplies compressed air to three cylinders. An indirect intercooler supplied by a low-temperature circuit plus specially designed compressors further enhance the turbocharger’s power output. The package of technology also includes High Precision Injection – which works at maximum pressure of 350 bar to ensure fine atomisation of fuel and therefore faster engine response – as well as VALVETRONIC variable valve timing and Double-VANOS fully variable camshaft timing.

The engine variant in the new BMW M3 Competition Sedan with M xDrive and new BMW M3 Competition Touring with M xDrive develops an extra 15 kW/20 hp thanks to optimised configuration of the digital engine control unit (DME). The six-cylinder in-line engine now generates maximum output of 390 kW/530 hp (up from the previous 375 kW/510 hp) at 6,250 rpm. The upgraded engine, which also serves as the basis for the unit powering the BMW M4 GT3, summons its peak torque of 650 Nm (479 lb-ft) between 2,750 and a now even higher 5,730 rpm. The result is even more ferocious, sustained power delivery that adds another layer of intensity to the performance experience – in particular when the driver is exploring the car’s dynamic limits – and enables impressive acceleration figures.

The new BMW M3 Competition Sedan with M xDrive accelerates
from 0 to 100 km/h (62 mph) in 3.5 seconds, and the new BMW M3 Competition Touring with M xDrive completes the same sprint in 3.6 seconds – only a touch longer, despite its higher kerb weight. The increased output of the two all-wheel-drive models is reflected in 0 to 200 km/h (124 mph) times that are 0.5 seconds quicker in each case. The sedan now records a time of 11.8 seconds, the Touring 12.4 seconds.

All variants of the new BMW M3 Sedan and new BMW M3 Touring have an electronically limited top speed of 250 km/h (155 mph) as standard. However, if the optional M Driver’s Package is specified, this figure rises to 290 km/h (180 mph) for the sedans and 280 km/h (174 mph) for the Touring model, allowing drivers to utilise the full potential of the powerful engines.

The two most powerful models are equipped with M xDrive to elevate traction to an even higher level. The rear-biased setup of the intelligent all-wheel-drive system further enhances the agility of the new BMW M3 Competition Sedan with M xDrive and new BMW M3 Competition Touring with M xDrive. The system teams up with the Active M Differential at the rear axle – whose operation is also fully variable – to add to the signature M feeling when powering through corners. In addition to the default 4WD setting, the driver can also select 4WD Sport mode via the M Setup menu. Here, a higher proportion of drive power is sent to the rear wheels for even more agile handling. Switching off DSC (Dynamic Stability Control) also brings 2WD mode into play, which means power is sent exclusively to the rear wheels. This mode offers skilled drivers a pure-bred driving experience without interventions from the control systems.

Timeline;
0:00 Intro & sound
0:30 M3 Sedan
1:26 M3 Touring
2:15 Infographics

Source : BMW

#M3 #M3Touring #M3G81 #NewM3 #M3Facelift #2025BMWM3

LEAVE A REPLY

Please enter your comment!
Please enter your name here